Events

 

PE03257A.gif (4096 byte)

  

Joint ACTC/NI Workshop on Advances in Real Time Control for Automotive Systems
20 Feb 2006
General Motors University, Auburn Hills Campus, Detroit, USA
Improved control can provide automotive designers with a competitive advantage with little additional cost. This one-day workshop focuses upon new developments in automotive control and it includes an international perspective from both the USA and Europe on new techniques and technologies. There should be ample time for questions and discussion and the delegates will receive copies of all of the notes presented. There is no charge for members of the Applied Control Technology Consortium (ACTC) and there is a much-reduced cost for students. Full details of the day's agenda, on-line registration, details of hotels and travel directions, can be found here.







CALL FOR PAPERS !!

IEEE Transactions on Control Systems Technology SPECIAL ISSUE on Control Applications in Automotive Engineering
2006

The IEEE Technical Committee on Automotive Control (TCAC) seeks papers for a special issue on automotive controls for the IEEE Transactions on Control Systems Technology. The Special Issue will describe selected control problems for emerging automotive systems and recent trends in methodologies and applications of control to these systems. Thus, the Special Issue is intended to provide a timely update on the evolution of automotive control technologies, both in research as well as in production.

Click here for additional information!



2006 Informal Workshop on Automotive Clutch Control
May 25-26, 2006
Department of Engineering, Università degli Studi del Sannio, Benevento, Italy

Clutch control is seen as an increasingly important enabling technology for the automotive industry, being central for traction control and automatic gear shifting for improved safety, drivability, comfort and fuel economy. This invitation-only workshop is meant to provide an informal forum for leading academic and industrial researchers to freely exchange ideas, problems and recent developments and results. The presented presentations may be informal, tentative or speculative, as well as of publication-ready maturity. The contributions may deal with various aspects of clutch control within the framework of e.g. wet and dry clutches, automated manual transmission, automatic transmissions, driveline control, traction control, clutch use within hybrid vehicles, sub-system control, modeling and simulation, experimental studies, etc, for passenger cars as well as heavy vehicles. The submitted abstracts and papers will be uploaded to a web-page accessible to participants only, and will not constitute a formal publication; in other words, the papers may be submitted for publication elsewhere.

Click here for additional information!



2006 IEEE Conference on Control Applications (CCA)
October 4–6, 2006, Munich, Germany

The IEEE Technical Committee on Automotive Control (TCAC) is organizing invited sessions at the 2006 IEEE Conference on Control Applications. Papers are invited on original investigations relating to modeling, analysis, and control of automotive systems. Specific topics of interest include, but are not limited to: engine/powertrain dynamics and control, alternative propulsion systems, fuel cells, hybrid vehicles, vehicle dynamics and control, climate control, control of exhaust gas aftertreatment, automated highway applications, advanced automotive sensing and actuation, estimation and diagnostics.

Click here for additional information!



Workshop On Open Problems
April 7, 2006
Detroit, MI, USA

The IEEE Technical Committee on Automotive Control is organizing a one day workshop on "Open Problems and Challenges in Automotive Control" on Friday, April 7, immediately following the 2006 SAE World Congress. The planned venue for the workshop is the Conference and Event Center at Greenfield Village in Dearborn, Michigan and it will be free of charge to all participants. We expect attendance from the universities and automotive companies in the area, as well as attendees from the SAE Congress who are interested in powertrain control.

Click here for a flyer containing additional information!
Click here for driving directions from the Detroit Metro Airport and other areas of Detroit, MI.



CALL FOR PAPERS !!

IEEE Intelligent Vehicles IV 2007
June 25-27, 2007
Hilton Hotel, Istambul, Turkey

Papers dealing with all aspects of vehicle-related intelligent systems and cooperation between vehicles and infrastructures will be solicited for IV'07. More information on the symposium will be available at the web site:

http://www2.itu.edu.tr/~iv2007



CALL FOR PAPERS !!



2006 American Control Conference Silver Anniversary
June 14–16 Minneapolis, Minnesota, USA

ADVANCES IN CONTROL OF TRANSPORTATION AND AUTOMOTIVE SYSTEMS

The Automotive and Transportation Systems Panel (A&TSP) of the ASME Dynamic Systems and Controls Division and the IEEE Technical Committee on Automotive Control (TCAC) are jointly sponsoring invited sessions at the 2006 American Control Conference. Papers are invited on original investigations relating to modeling, analysis, and control of automotive and transportation systems. Specific topics of interest include, but are not limited to: engine/powertrain dynamics and control, alternative propulsion systems, vehicle dynamics and control, control of climate and emissions, intelligent transportation systems (ITS), automated highway applications, advanced automotive sensing and actuation, estimation and diagnostics.

You are invited to submit a paper or an extended summary describing problem formulation, methodology, work performed, results, conclusions, and key references. If submitted, extended summaries should be 1000 words at a minimum and must be of sufficient detail to allow peer review of results. Please submit papers or extended summaries

• in pdf format,
• including the Paperplaza PIN for each contributing author, and
• indicating the corresponding author and contact information

to one of the session organizers listed below.

Papers or summaries should be received by August 15, 2005. Authors will be notified of acceptance by September 6, 2005. Submissions accepted for inclusion in an invited session must then be submitted online, as papers (not as extended summaries), via

http://www.paperplaza.net by September 15, 2005. All ACC submissions must strictly follow the page limit and column specifications outlined on the ACC website or risk rejection without review.

The ACC Conference Program Committee will make the decision regarding final acceptance of the invited sessions by January 31, 2006. Complete papers will be due on March 15, 2006, and completed session papers must conform to the same standards as regular contributed papers. The American Automatic Control Council (AACC) is particularly interested in enhancing the applications and industrial perspective of the ACC. Consequently, prospective authors from industry are encouraged to submit.


Session Organizers:

ASME A&TS Committee
Ardalan Vahidi
University of Michigan
(734) 936-0424
avahidi@umich.edu


IEEE TCAC Committee
Kevin Fischbach
Visteon Corporation
(734) 481-8652
kfischba@visteon.com

http://www.a2c2.org/conferences/acc2006




2006 American Control Conference Silver Anniversary
April 3-6, 2006
June 14–16 Minneapolis, Minnesota, USA

Deadline for all submissions and proposals: September 15, 2005
Notification of Acceptance/Rejection: January 31, 2006

Final manuscript submission deadline: March 15, 2006

http://www.a2c2.org/conferences/acc2006/call_for_papers.htm




SAE 2006 World Congress
April 3-6, 2006
Cobo Center, Detroit, Michigan, USA

Deadline for abstracts: June 1, 2005
Draft Manuscripts Due to Session Organizers: September 30, 2005

Final Manuscripts Due to SAE January 10, 2006

http://www.sae.org/congress/techprogram/cfp.htm




2005 IEEE Conference on Control Applications
Toronto, Canada, 28-31 August, 2005

Submission period: expired

http:/www.eng.uwo.ca/cca05/




44th IEEE Conference on Decision and Control and European Control Conference ECC 2005
Seville, Spain, 12-15 December, 2005 Submission period: expired

http://www.esi2.us.es/~cdcecc05/


 


  

PREVIOUSLY HELD CONFERENCES AND MEETINGS


SAE 2003 World Congress
March 2003, Detroit

Deadline for submitting paper offers June 1 2002
Draft Manuscripts due to session organizers August 31,
2002
Final Manuscripts due to SAE December 10, 2002

http://www.sae.org/congress/2002/cfp.htm

expired deadline

  


Conference on Control Applications
to be held jointly with the Computer Aided Control System Design Conference
18-20 September, 2002

Scottish Exhibition and Conference Centre
Glasgow, Scotland

http://www.cca2002.org/